IELTSDaily

Flow-chart completion

A

The newspaper production process has come a long way from the old days when the paper was written, edited, typeset and ultimately printed in one building with the journalists working on the upper floors and the printing presses going on the ground floor. These days the editor, subeditors and journalists who put the paper together are likely to find themselves in a totally different building or maybe even in a different city. This is the situation which now prevails in Sydney. The daily paper is compiled at the editorial headquarters, known as the prepress centre, in the heart of the city, but printed far away in the suburbs at the printing centre. Here human beings are in the minority as much of the work is done by automated machines controlled by computers.

B

Once the finished newspaper has been created for the next morning’s edition, all the pages are transmitted electronically from the prepress centre to the printing centre. The system of transmission is an update on the sophisticated page facsimile system already in use on many other newspapers. An imagesetter at the printing centre delivers the pages as film. Each page takes less than a minute to produce, although for colour pages four versions, once each for black, cyan, magenta and yellow are sent. The pages are then processed into photographic negatives and the film is used to produce aluminium printing plates ready for the presses.

C

A procession of automated vehicles is busy at the new printing centre where the Sydney Morning Herald is printed each day. With lights flashing and warning horns honking, the robots (to give them their correct name, the LGVs or laser guided vehicles) look for all the world like enthusiastic machines from a science fiction movie, as they follow their own random paths around the plant busily getting on with their jobs. Automation of this kind is now standard in all modern newspaper plants. The robots can detect unauthorised personnel and alert security staff immediately if they find an “intruder”; not surprisingly, tall tales are already being told about the machines starting to take on personalities of their own.

D

The robots’ principal job, however, is to shift the newsprint (the printing paper) that arrives at the plant in huge reels and emerges at the other end some time later as newspapers. Once the size of the

day’s paper and the publishing order are determined at head office, the information is punched into the computer and the LGVs are programmed to go about their work. The LGVs collect the appropriate size paper reels and take them where they have to go. When the press needs another reel its computer alerts the LGV system. The Sydney LGVs move busily around the press room fulfilling their two key functions to collect reels of newsprint either from the reel stripping stations, or from the racked supplies in the newsprint storage area. At the stripping station the tough wrapping that helps to protect a reel of paper from rough handling is removed. Any damaged paper is peeled off and the reel is then weighed.

E

Then one of the four paster robots moves in. Specifically designed for the job, it trims the paper neatly and prepares the reel for the press. If required the reel can be loaded directly onto the press; if not needed immediately, an LGV takes it to the storage area. When the press computer calls for a reel, an LGV takes it to the reel loading area of the presses. It lifts the reel into the loading position and places it in the correct spot with complete accuracy. As each reel is used up, the press drops the heavy cardboard core into a waste bin. When the bin is full, another LGV collects it and deposits the cores into a shredder for recycling.

F

The LGVs move at walking speed. Should anyone step in front of one or get too close, sensors stop the vehicle until the path is clear. The company has chosen a laserguide function system for the vehicles because, as the project development manager says “The beauty of it is that if you want to change the routes, you can work out a new route on your computer and lay it down for them to follow”. When an LGV’s batteries run low, it will take itself off line and go to the nearest battery maintenance point for replacement batteries. And all this is achieved with absolute minimum human input and a much reduced risk of injury to people working in the printing centres.

G

The question newspaper workers must now ask, however is, “how long will it be before the robots are writing the newspapers as well as running the printing centre, churning out the latest edition every morning?”


Questions 33 – 40
Complete the flow-chart below.
Choose NO MORE THAN THREE WORDS from the text for each answer. Write your answers in boxes 33-40 on your answer sheet.

screenshot

9 responses on "Flow-chart completion"

  1. Profile photo of hanie

    33.transmitted electronically
    34.many other newspapers
    35.photographic negatives
    36.alerts
    37.tough wrapping
    38.weighed
    39.paster robot
    40.waste bin

  2. Profile photo of Arefeh Tajik

    33 transmitted electronically
    34 photographic negatives
    35 aluminium plates
    36 programmed
    37 tough wrapping
    38 weighed
    39 paster robot
    40 storage area

  3. Profile photo of Sanaz Nakhodchi

    33.Transmitted electronically
    34.Colour pages
    35.Aluminium printing plates
    36.Programmed
    37.Tough wrapping
    38.Weighed
    39.Paster Robots
    40.Storage area

    • Profile photo of Alireza Ramedani

      unfortunately some of your answers are not correct.

      33 transmitted (electronically)
      34 (photographic) film/negative(s)
      35 (aluminium) printing plates
      36 programmed
      37 damaged paper/wrapping
      38 weighed
      39 paster robot(s)
      40 storage area

  4. Profile photo of Maral

    33. transmitted electronically
    34. photographic negatives
    35. aluminium printing plates
    36. programmed
    37. tough wrapping
    38. weighed
    39. paster robots
    40. storage area

    • Profile photo of Alireza Ramedani

      unfortunately not all of your answers are correct.

      33 transmitted (electronically)
      34 (photographic) film/negative(s)
      35 (aluminium) printing plates
      36 programmed
      37 damaged paper/wrapping
      38 weighed
      39 paster robot(s)
      40 storage area

  5. Profile photo of shiva

    33-transmitted electronically
    34-photographic negatives
    35-aluminium printing plates
    36-programmed
    37-rough handling
    38-weighed
    39-paster robots
    40-storage area

Leave a Message

ABOUT IELTS

The test comprises of four separate skills. The written section includes Listening, Reading, Writing. Speaking is tested separately either before the written section or after it. It assesses English language skills at all levels. Recently biometric security has been added to protect and ensure test integrity.

IELTS IS THE HIGH-STAKES ENGLISH TEST FOR STUDY, MIGRATION OR WORK

Best IELTS Preparation site in Asia

Popular Courses

Ultimate IELTS Podcasts

Instagram

  • شروع ثبت نام دوره هاى فاندامنتال، پرى ايلتس و آيلتس. شروع دوره ها از ١٤ فروردين. براى اطلاعات بيشتر با ما تماس بگيريد يا ديركت بدهيد.

Follow Us!

Appointment

top